Sail Life · vidéo

Ce que couvre cette vidéo

Mads continues the interior refit of the sailboat Athena, focusing on constructing a navigation station and a shower partition. To create a curved plywood seat for the nav station, he uses a series of parallel cuts spaced by the width of two stir sticks, then fills the kerfs with thickened epoxy to achieve structural rigidity. He sets the seat height at 42 centimeters and depth at 45 centimeters, aligning the structure with the hull curvature. For the shower, he installs a foam partition to separate the head, planning for a folding acrylic door to prevent water spray. He notes that epoxy curing requires temperatures above 5°C, limiting his ability to tab components to the uninsulated hull as winter approaches.0:45 The nav station design remains constrained by the pending selection of a gimbaled induction cooktop and convection oven, which will dictate the final galley layout and counter space.

Bateaux dans cette vidéo

Plus de vidéos de Sail Life

The road back to boat work: We're gravel rich & ready for shipping containers! Ep. 694sept. 2026Can I build an aluminum fuel tank with the xTool MetalFab laser welder and CNC? Ep. 693août 2026The road back to boat work: shipping delays, site prep and bending metal with a 3D print Ep. 692août 2026The road back to boat work: Cutting trees, picking up plywood, and 240V in the shop. Ep. 691août 2026

De Sail Life — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.