Sailing Jibsea · vidéo

Ce que couvre cette vidéo

Travis installs a hot water heater on the Yanmar 4JH2E engine of Jibsea to provide hot water while motoring.1:05 He removes existing hoses connected to a hydronic system and reroutes the coolant lines to the new heater using brass elbows and new hose.2:00 To ensure proper circulation, he follows the engine schematic for inlet and outlet ports and relocates the expansion tank to a position no more than four inches below the top of the heat exchanger.7:06 After plumbing the system, he fills the loop with Yanmar coolant, manually burping the lines to remove air pockets by cycling the engine on and off.9:22 He addresses a minor leak at a fitting by applying high-temperature thread sealant.10:58 The engine runs for 30 minutes without overheating, confirming the installation is successful.11:47

Plus de vidéos de Sailing Jibsea

HOVERAir X1 PROMAX: 3 Month Honest Drone Reviewaoût 2026The REAL Reason We Had to Sail to Norway - Ep 284août 2026Our First Time Sailing Norway’s Famous Fjords - Ep 283août 2026When 2 Grown Kids Sail into Ålesund for the First Time - Ep 282août 2026

De Sailing Jibsea — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.