Sailing Jibsea · video

What this video covers

Travis installs a hot water heater on the Yanmar 4JH2E engine of Jibsea to provide hot water while motoring.1:05 He removes existing hoses connected to a hydronic system and reroutes the coolant lines to the new heater using brass elbows and new hose.2:00 To ensure proper circulation, he follows the engine schematic for inlet and outlet ports and relocates the expansion tank to a position no more than four inches below the top of the heat exchanger.7:06 After plumbing the system, he fills the loop with Yanmar coolant, manually burping the lines to remove air pockets by cycling the engine on and off.9:22 He addresses a minor leak at a fitting by applying high-temperature thread sealant.10:58 The engine runs for 30 minutes without overheating, confirming the installation is successful.11:47

More from Sailing Jibsea

HOVERAir X1 PROMAX: 3 Month Honest Drone ReviewAug 2026The REAL Reason We Had to Sail to Norway - Ep 284Aug 2026Our First Time Sailing Norway’s Famous Fjords - Ep 283Aug 2026When 2 Grown Kids Sail into Ålesund for the First Time - Ep 282Aug 2026

From Sailing Jibsea — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.