RAN Sailing · vidéo

Ce que couvre cette vidéo

Johan and Malin construct the cockpit sole and a large integrated hatch for their 52-foot sailboat using PET foam core sandwich panels.▶ 0:16 The process involves cutting the foam to size with a handheld CNC router, beveling edges at 45 degrees, and laminating the panels using a vacuum bagging technique.▶ 1:01 Johan details the function of each layer in the vacuum bag: the vacuum bag itself for atmospheric pressure, breeder mesh for uniform pressure and excess resin absorption, perforated release film to prevent resin starvation, and peel ply to create a ready-to-bond surface without amine blush.▶ 4:23 The sole is installed with a 1% slope toward the drains to ensure water runoff.▶ 14:59 The hatch design incorporates double seals and increased foam thickness to provide the rigidity required to support a cockpit table base.▶ 15:45 The project concludes with the installation of the sole, while the crew monitors storm Amy, which brings wind gusts of 34 knots and leaks into their workshop.▶ 20:43

Plus de vidéos de RAN Sailing

Port Side Toe Rail & Deckhouse Carbon Corners - Ep. 494 Ran Sailingjuil. 2026The Boat Gets Its Edge - Ep. 493 Ran Sailingjuin 2026Opening Up The Deckhouse: The Last Window Cutout - Ep. 492 Ran Sailingjuin 2026The Last Major Lamination on Our 52ft Sailboat! - Ep. 491 Ran Sailingjuin 2026

De RAN Sailing — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.