BoatworksToday · video

Hva denne videoen dekker

Andy discovers that the mainsail currently on his 24-foot sailboat is incorrect after measuring a 21-foot luff against a 30-foot mast.▶ 1:56 The discrepancy suggests the existing sail was sourced from a different vessel, as the current dimensions would place the boom roughly 12 feet above the deck.▶ 2:32 He plans to coordinate with Precision Sails to determine the correct measurements for a new sail.▶ 12:35

Separately, the project continues with the fabrication of new cabin sole panels.▶ 5:40 After applying an initial layer of fiberglass to the underside, he trims the edges to ensure a clean surface for subsequent glassing.▶ 5:07 He uses a non-waxed polyester laminating resin and plans to finish with a wax-containing gel coat to create an air barrier for proper curing.▶ 9:51 Before installing the panels, he must strip existing one-part paint from the hull interior to ensure compatibility with a planned two-part barrier coat.▶ 10:36 The project also awaits the arrival of new Victron electrical components.▶ 13:09

Mer fra BoatworksToday

Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuli 2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!juli 2026Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!juni 2026Everything Fits! ~ Coosa Bulkheads, New Soles & Closing Out The Old Thruhulls!juni 2026

Fra BoatworksToday – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.