The Sailing Brothers · video

Hva denne videoen dekker

A propeller spins off the prop shaft of the Sailing Brothers' catamaran while picking up a mooring in Nelson Bay, Port Stephens, Australia, leaving the boat with no forward or reverse gear.▶ 1:39 The locking pieces that prevent the prop from unscrewing in reverse were broken — a fault Adam and Luke acknowledge they should have caught.▶ 1:22 Rob from Squid Diving Co. in Nelson Bay dives to seven metres in cold, murky water and recovers the propeller after a 20-minute search.▶ 3:37 Reinstallation is complicated by a missing nose cone: the original spacer is gone, and without it a standard nut is too small to bear on the shaft correctly.▶ 6:25 A chance encounter with Steve, another Prout owner, produces a stainless steel washer; a local engineer in Salamander turns it on a lathe to 26 mm.▶ 7:47 Drilling through the prop shaft for a split pin proves impossible with available tools, so Luke finds a Navy safety-wire technique — drilling through the nut's flange and locking it with seizing wire — which they execute with a Dremel.▶ 15:08 The repair uses Loctite and a nylon locking nut and costs roughly £20 against an estimated £500-plus to ship a replacement cone from the UK.▶ 18:05 The boat departs Nelson Bay Thursday, heading south down the coast.▶ 19:55

Båter i denne videoen

Mer fra The Sailing Brothers

Did We Do It Wrong? | Windlass Updatejuni 2026Made Our Own COPPER COATING, Will It Work?juni 2026DON'T DO IT!! But We Did It Anyway... HOMEMADE COPPER COATjuni 2026A Cruisers Nightmare "Scammed By a Child On Facebook Marketplace" juni 2026

Fra The Sailing Brothers – se kanalens båt, mannskap og alle analyserte videoer.