The Sailing Brothers · vídeo

Qué cubre este vídeo

A propeller spins off the prop shaft of the Sailing Brothers' catamaran while picking up a mooring in Nelson Bay, Port Stephens, Australia, leaving the boat with no forward or reverse gear.1:39 The locking pieces that prevent the prop from unscrewing in reverse were broken — a fault Adam and Luke acknowledge they should have caught.1:22 Rob from Squid Diving Co. in Nelson Bay dives to seven metres in cold, murky water and recovers the propeller after a 20-minute search.3:37 Reinstallation is complicated by a missing nose cone: the original spacer is gone, and without it a standard nut is too small to bear on the shaft correctly.6:25 A chance encounter with Steve, another Prout owner, produces a stainless steel washer; a local engineer in Salamander turns it on a lathe to 26 mm.7:47 Drilling through the prop shaft for a split pin proves impossible with available tools, so Luke finds a Navy safety-wire technique — drilling through the nut's flange and locking it with seizing wire — which they execute with a Dremel.15:08 The repair uses Loctite and a nylon locking nut and costs roughly £20 against an estimated £500-plus to ship a replacement cone from the UK.18:05 The boat departs Nelson Bay Thursday, heading south down the coast.19:55

Barcos en este vídeo

Más de The Sailing Brothers

Sailing from PARADISE to the Loudest City in Indonesiaago 2026SAILING AND ANCHORING IN SUPER DEEP WATER. HIKING AN ACTIVE VOLCANO ago 2026Channel Update From Indonesiaago 2026Theft, Damage And Corruption. Worst Week Of Our Cruising Adventure!ago 2026

De The Sailing Brothers — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.