Sailing Magic Carpet · video

Hva denne videoen dekker

During a rig refit on a Cape George Cutter 36, the owners discovered the mast was offset by 1.25 inches to starboard, causing the spar to touch the mast partners.9:21 To diagnose the issue, they tuned the rig using a weighted halyard to check for vertical alignment and rake, confirming the mast step was not centered.6:43 After removing the mast with a crane, they chiseled out the old epoxy, filled the original bolt holes, and re-drilled the mast step 0.625 inches to port to center the spar.18:05 The crew also took measurements for new standing rigging and sails, noting that outboard chain plates installed during a previous refit required adjustments to wire lengths.5:24 They plan to use Spartite to seal the mast partners once the spar is re-stepped.16:27 The project demonstrates that verifying mast alignment at both the partners and the step is essential before ordering custom standing rigging.

Båter i denne videoen

Mer fra Sailing Magic Carpet

We're Starting to Lose Our Mindsokt. 2026We Found An Old Map Leading Us To Hotsprings...okt. 2026A Mysterious Presence on this Northern Islandsep. 2026Sailing Northern Canada | Alone and at Peacesep. 2026

Fra Sailing Magic Carpet – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.