Sailing Magic Carpet · video

Cosa tratta questo video

During a rig refit on a Cape George Cutter 36, the owners discovered the mast was offset by 1.25 inches to starboard, causing the spar to touch the mast partners.9:21 To diagnose the issue, they tuned the rig using a weighted halyard to check for vertical alignment and rake, confirming the mast step was not centered.6:43 After removing the mast with a crane, they chiseled out the old epoxy, filled the original bolt holes, and re-drilled the mast step 0.625 inches to port to center the spar.18:05 The crew also took measurements for new standing rigging and sails, noting that outboard chain plates installed during a previous refit required adjustments to wire lengths.5:24 They plan to use Spartite to seal the mast partners once the spar is re-stepped.16:27 The project demonstrates that verifying mast alignment at both the partners and the step is essential before ordering custom standing rigging.

Barche in questo video

Altro da Sailing Magic Carpet

We're Starting to Lose Our Mindsott 2026We Found An Old Map Leading Us To Hotsprings...ott 2026A Mysterious Presence on this Northern Islandset 2026Sailing Northern Canada | Alone and at Peaceset 2026

Da Sailing Magic Carpet — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.