Sailing Magic Carpet · video

¿Qué cubre este video?

During a rig refit on a Cape George Cutter 36, the owners discovered the mast was offset by 1.25 inches to starboard, causing the spar to touch the mast partners.9:21 To diagnose the issue, they tuned the rig using a weighted halyard to check for vertical alignment and rake, confirming the mast step was not centered.6:43 After removing the mast with a crane, they chiseled out the old epoxy, filled the original bolt holes, and re-drilled the mast step 0.625 inches to port to center the spar.18:05 The crew also took measurements for new standing rigging and sails, noting that outboard chain plates installed during a previous refit required adjustments to wire lengths.5:24 They plan to use Spartite to seal the mast partners once the spar is re-stepped.16:27 The project demonstrates that verifying mast alignment at both the partners and the step is essential before ordering custom standing rigging.

Barcos en este video

Más de Sailing Magic Carpet

Sailing Northern Canada | Fishing, Beachcombing.ago 2026Suddenly, The Boat Wasn't Where We Left It [Ep 3]ago 2026An Island That Google Maps Can't See [Ep 2]ago 2026We're Sailing to Mexico [Episode 1]ago 2026

De Sailing Magic Carpet — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.