Sailing Magic Carpet · vidéo

Ce que couvre cette vidéo

During a rig refit on a Cape George Cutter 36, the owners discovered the mast was offset by 1.25 inches to starboard, causing the spar to touch the mast partners.9:21 To diagnose the issue, they tuned the rig using a weighted halyard to check for vertical alignment and rake, confirming the mast step was not centered.6:43 After removing the mast with a crane, they chiseled out the old epoxy, filled the original bolt holes, and re-drilled the mast step 0.625 inches to port to center the spar.18:05 The crew also took measurements for new standing rigging and sails, noting that outboard chain plates installed during a previous refit required adjustments to wire lengths.5:24 They plan to use Spartite to seal the mast partners once the spar is re-stepped.16:27 The project demonstrates that verifying mast alignment at both the partners and the step is essential before ordering custom standing rigging.

Bateaux dans cette vidéo

Plus de vidéos de Sailing Magic Carpet

We're Starting to Lose Our Mindsoct. 2026We Found An Old Map Leading Us To Hotsprings...oct. 2026A Mysterious Presence on this Northern Islandsept. 2026Sailing Northern Canada | Alone and at Peacesept. 2026

De Sailing Magic Carpet — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.