Sailing Umavídeo
Drilling holes in our boat to make it unsinkable | Step 476
28 de fevereiro de 2026 · 33 min · 118K visualizações
Driller in hazmat suit bores hull of white sailboat
O que este vídeo aborda
Dan and Kika install multiple bilge pumps and reinforced polymer through-hull fittings to finalize the hull integrity of their boat during a refit. They select Whale and Johnson bilge pumps featuring detachable electronics, serviceable impellers, and integrated float switches for maintenance accessibility.1:12 To install the through-hulls, they use a specialized hole saw with a spring-loaded pin mechanism that ejects the fiberglass core plug, preventing the need for manual removal.8:23 After measuring and cutting the through-hulls to fit the variable hull thickness, they seal the fittings to ensure a watertight finish.13:23 The crew then permanently seals a temporary drainage hole in the cockpit bilge with epoxy and fiberglass.19:59 To verify the system, they perform a controlled flood test in the cockpit locker, confirming the pump clears the water in six minutes.30:38 These installations complete the hull sealing process, rendering the vessel theoretically ready for launch.
Mais de Sailing Uma
De Sailing Uma — veja o barco, a tripulação e cada vídeo analisado do canal.
The Sailing Directory Newsletter
Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.