Sven Yrvind · vídeo

O que este vídeo aborda

Sven Yrvind fits and scarfs Divinycell foam panels to form the hull sides of his small boat build.0:02 Working with four sheets total, he cuts pieces to fill gaps between sections — one top piece measures 40 mm, a lower section 55 mm — and scarfs them butt-to-butt directly in place rather than pre-joining them on a bench.0:16 He notes this in-place scarfing is a key advantage of foam-core construction over plywood: offcuts can be glued together to fill gaps, producing very little waste.0:41 After cutting two more pieces for the bow section, he dry-fits them on both sides to confirm the hull is symmetrical, using a centerline string stretched along the bottom as the reference datum rather than the support frames.2:02 A small radius will be added at the sheer by gluing a roughly 3 cm strip on the inside face.1:27 The session ends with all four sheets accounted for and the hull-side panels fitting cleanly to the centerline string.3:27

Mais de Sven Yrvind

Nervously Cutting the Divinycell Sheets.out. de 2026Trying to Get the Sheerline Right.out. de 2026More molds up.out. de 2026The First Molds Are Up.out. de 2026

De Sven Yrvind — veja o barco, a tripulação e cada vídeo analisado do canal.

The Sailing Directory Newsletter

Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.