Epiphany Sailingvideo

Installed 2 new line chocks on bow sprit C&C 39 Sailboat

August 20, 2024 · 2 min · 191 views

What this video covers

Chafe on anchor lines at the bowsprit is the problem Gordon addresses by installing two new line chocks on the C&C Yachts 39 Epiphany.Watch The original boat had chocks, but the added bowsprit left an exposed aluminum angle where a snubber line could saw back and forth and wear through — a chafe wrap was a workaround, not a fix.0:15 Gordon buys two new chocks and mounts them directly on the angle so any line runs straight through a chock instead of riding the bare metal edge.0:40 Hardware is all stainless steel in 3/16-inch size, secured with nylon lock nuts to prevent loosening. Because the bowsprit angle is aluminum, he marks hole locations with a Sharpie, uses a spring-loaded center punch to dimple the metal and keep the drill bit centered, then drills and bolts both chocks through with an impact gun. The result is a straight, protected lead for the anchor snubber that eliminates the need for emergency chafe wraps. Fitting chocks directly to a bowsprit angle is a faster and more reliable chafe solution than wrapping the line after the fact.

Watch on YouTube

Boats in this video

C&C Yachts 39Their boat

More from Epiphany Sailing

YOWZA ITS A THUNDERSTORM SHOWER!!!Sep 2026Bris 12 ft dinghy floor board repairs Apr 2026Space X Rocket over Georgetown Exumas Bahamas 2/19/2026Feb 202650 knot Blow Georgetown Exumas saved by Backup Snubber!Feb 2026

From Epiphany Sailing — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.

Report an issue