Sailing Uma · video

What this video covers

Dan and Kika of Sailing Uma install dual electric motor controllers and a liquid cooling system for their Oceanvolt propulsion setup.1:42 To maximize space in the tight engine compartment, they offset the motor controllers from the bulkhead using custom-welded brackets, allowing cables and plumbing to route behind the units.0:18 They install Vetus cooling fins through the hull into the watertight "ocean vault" compartments, opting to seal them with Sikaflex rather than antifouling.11:32 The cooling circuit uses a pump mounted to the bulkhead with 1.5-inch hose clips.14:25 After wiring the phase cables and power cables, they use the Victron Servo VRM system to allow remote configuration by Oceanvolt technicians, successfully syncing the new battery bank with the motor controllers.20:29 The installation concludes with the mounting of throttle pods in the cockpit.18:15 The motors and controllers successfully initialize and spin during a dockside test.21:00

More from Sailing Uma

Our boat won’t look the same after this | Step 495Aug 2026The ONE Thing We Disagreed on This Entire Refit | Step 494Aug 2026We Owe You The Full StoryJul 2026We spent $10,000 on something Pretty | Step 493Jul 2026

From Sailing Uma — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.