BoatsContessa 28

Contessa 28

Masthead Sloop · Fin keel, spade rudder · First built 1977

A Doug Peterson-designed masthead sloop with a fin keel and spade rudder, built for balanced performance since 1977

Designed by Doug Peterson, built by Jeremy Rogers.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin w/spade Rudder

See her sail

The Contessa 28, on the water

The fleet's own footage — the truest look at how she really moves.

Footage from practicalboatowner

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her heavy displacement on a moderate beam gives 23 — a moderate, middle-of-the-road motion.

Comfort ratio 23
CoastalBluewater

1.98 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.98
LightHeavy

292 — heavy for her waterline, built to carry stores and ride steadily.

Displacement / length 292
EasygoingPowered-up

14.9 — modest power for her weight; easygoing rather than lively, and happier with a breeze.

Sail area / displacement 14.9
TenderStiff

40% of her weight is ballast — moderately stiff, a middle-of-the-road stability.

Ballast 40%

A capable cruiser that sits just inside the offshore line — coastal work with real passages in her.

What the fleet has seen

The Contessa 28, as the fleet has seen it

Derived from the videos the fleet has analysed of this model. ▶ marks open the moment aboard.

The Contessa 28 is a Masthead Sloop designed by Doug Peterson and built by Jeremy Rogers Ltd. from 1977 to the present, featuring a fin keel with a spade rudder. It measures 8.4 meters LOA, with a 2.9-meter beam, 1.5-meter draft, and displaces 3161 kg. The model has a SA/disp of 14.9 and a comfort ratio of 22.9. Long-distance cruising preparation for boats like the Contessa 28 emphasizes systematic maintenance, crew dynamics, and route planning, including researching ocean currents and prevailing winds.1:44 Redundancy in critical systems, such as dual fuel filters and a comprehensive spare parts inventory, is prioritized.17:28 Rig integrity is maintained by addressing chafe points, using high-strength lines like Dyneema, and installing messenger lines in the mast for halyard replacement.12:08 Safety equipment, like life rafts, must be stored accessibly.17:52 Diversifying cooking methods reduces reliance on region-specific gas canisters, and AIS and radar are essential for situational awareness.22:33

The living fleet

Sailed by the fleet

Where the fleet has filmed this boat.

Seen once across one channel of the fleet.

Basemap © Wikimedia Commons · CC BY-SA 4.0

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
40.2%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
14.9
Displacement / length
292.2
Comfort ratio
22.9
Capsize screening
1.98
Hull speed
6.3 kn
Pounds / inch immersion
740
Hull
Hull type
Fin w/spade rudder
Construction
Fiberglass
Ballast type
Lead
Production
Years built
First built 1977
Designer
Doug Peterson
Builder
Jeremy Rogers

Boats like this, on the water

More boats like her, on the water

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Catalina Yachts 278.18 mSame hull family0.3 m shorterA masthead sloop with 6,662 hulls produced over two decades, serving as a staple of coastal cruising since 1971
Sabre 27 (Hill)8.23 mSame hull family0.2 m shorterAn Alan Hill-designed masthead sloop featuring a skeg-hung rudder and a stiff, stable hull for coastal cruising
Cascade Yachts 278.23 mSame hull family0.2 m shorterA masthead sloop with a fin keel and spade rudder, designed by Robert A. Smith for balanced coastal cruising
Islander Yachts 288.51 mSame hull familyNear-identical lengthA Robert Perry-designed masthead sloop with over 400 built, favored by the designer himself for her balanced performance
Colvic Ltd. Sailor 268.21 mSame hull family0.2 m shorterA twin-keeled masthead sloop with hulls molded by Colvic and finished by various yards, including Atlanta Marine
Watkins Yachts 278.23 mSame hull family0.2 m shorterA masthead sloop with a skeg-hung rudder, offered in rare pilot house and keel-centerboard configurations

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep asking

The fleet has more to say

Search what's been said about the Contessa 28, or ask a specific question — the answer comes back written out, with links to the moments it draws on.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue