BoatsMoody 46

Moody 46

Cutter · Fin keel, spade rudder · 1997–2001

A Bill Dixon-designed cutter with a fin keel and spade rudder, built for comfortable, stable blue-water cruising

Designed by Bill Dixon.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin w/spade Rudder

See her sail

The Moody 46, on the water

The fleet's own footage — the truest look at how she really moves.

Footage from Practical Sailor

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 34 — a sea-kindly motion in a seaway.

Comfort ratio 34
CoastalBluewater

1.82 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.82
LightHeavy

234 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 234
EasygoingPowered-up

15.1 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 15.1
TenderStiff

32% of her weight is ballast — on the tender side; she'll heel readily and want a reef sooner.

Ballast 32%

A capable cruiser that sits just inside the offshore line — coastal work with real passages in her.

  • Heavier than ~87% of boats her size on file
  • Beamier than ~85% of boats her size on file

Compared with 2213 boats of the same type within a quarter of her length.

What the fleet has seen

The Moody 46, as the fleet has seen it

Derived from the videos the fleet has analysed of this model. ▶ marks open the moment aboard.

The Moody 46 is a 14.1-meter center-cockpit cruiser designed by Bill Dixon and built by Marine Projects in the UK between 1997 and 2001.0:09 This masthead sloop, displacing 14,490 kg with a 32% ballast ratio, features in-mast furling for shorthanded offshore passage-making.1:17 Its interior prioritizes a large aft owner’s stateroom, a walkthrough galley, and a saloon finished with teak joinery.3:31 Standard power is a Yanmar 75 or 100-horsepower engine, supported by 130 gallons of fuel capacity.4:17 The center cockpit provides a protected helm and increased interior volume, though it lacks a walkthrough transom.3:04 Prospective buyers should inspect the mild steel keel studs for corrosion, as they are prone to surface rust if bilge water reaches the keel joint.5:27 A 1999 model listed for $165,000 included a Vetus bow thruster and a 6.5kW generator, but required maintenance on teak cap rails, port seals, and air conditioning systems.7:10

The living fleet

Sailed by the fleet

Where the fleet has filmed this boat.

Seen 2 times across one channel of the fleet.

Basemap © Wikimedia Commons · CC BY-SA 4.0

On the water

The Moody 46 on video

What they go for

Market signal

Where the fleet has seen this model for sale, and the asking prices that came with it.

1seen for sale
1channel looked into buying
$165,000Median asking

From the fleet's own footage — our observed signal, not broker listings.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
32.4%
Rig & sail area
Rig
Cutter
Ratios
SA / displacement
15.1
Displacement / length
233.7
Comfort ratio
34.1
Capsize screening
1.82
Hull speed
8.4 kn
Pounds / inch immersion
2031
Hull
Hull type
Fin w/spade rudder
Construction
Fiberglass
Production
Years built
1997–2001
Units built
55
Designer
Bill Dixon
Builder
Moody, Sons)

Boats like this, on the water

More boats like her, on the water

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Oyster 4614.02 mSame hull familyNear-identical lengthA Holman & Pye designed staysail ketch built for offshore stability with a high ballast ratio and skeg-mounted rudder
Morgan Yachts 461/46214.17 mSame hull familyNear-identical lengthA Scheel-designed center-cockpit ketch built for The Moorings, offering a stable, high-comfort platform for blue water
Kelly-Peterson 4614.10 mSame hull familyNear-identical lengthA Doug Peterson-designed cutter built for long-range comfort with a skeg-mounted rudder and a high displacement-to-length ratio
Sweden Yachts 4514.15 mSame hull familyNear-identical lengthA 14.15-metre masthead sloop with a 2.3-metre draft and a 42% ballast ratio, designed for offshore speed and stability
Oceanic 46 (Brewer)13.94 mSame hull familyNear-identical lengthA Ted Brewer-designed cutter with a skeg-hung rudder, built for blue-water stability and comfortable offshore passage-making
Hylas Yachts 4614.10 mSame hull familyNear-identical lengthA German Frers-designed masthead sloop built for offshore performance with a high sail area to displacement ratio

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep asking

The fleet has more to say

Search what's been said about the Moody 46, or ask a specific question — the answer comes back written out, with links to the moments it draws on.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue