Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind continues construction on his small, shallow-draft boat in Laxo, focusing on structural reinforcement and steering components. He fabricates a new axle from duplex alloy, noting its superior strength compared to 316 stainless steel.▶ 1:17 For lifting the vessel, he utilizes a 200-meter, 10-millimeter polyester line from Rødbryn, which has a breaking strength of 2.8 tons.▶ 2:11 Yrvind applies an eight-millimeter layer of epoxy to the hull, ensuring a watertight seal.▶ 3:01 He installs the aft mast holder by roughening the contact surfaces and securing it against the transom, with plans to reinforce the assembly with fiberglass.▶ 3:38 Additionally, he modifies the steering system by grinding the plywood hockey sticks and adjusting the position of the dead pedal to improve ergonomics.▶ 4:59 He prepares to install the door, which requires removing the mattress to clear the workspace.▶ 4:59 These modifications prioritize structural integrity and mechanical reliability for his planned voyage to New Zealand.

Περισσότερα από το Sven Yrvind

Kai the bow paddle.Ιουλ 2026About safety.Ιουλ 2026My solution to crossing the Doldrums without using an engine.Ιουλ 2026Goose Barnacles Remower.Ιουλ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.