BoatsCapo 30

Capo 30

Masthead Sloop · Fin keel, spade rudder · 1984–1985

A short-lived 1984 racer with a fin keel and spade rudder, optimized for the MORC rule

Designed by Carl Schumacher, built by Westerly Marine.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin w/spade Rudder

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 19 — a quick, lively motion that feels every wave.

Comfort ratio 19
CoastalBluewater

2.14 — right around the 2.0 line, the edge between coastal and offshore.

Capsize screening 2.14
LightHeavy

206 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 206
EasygoingPowered-up

20.5 — plenty of sail for her weight; lively and quick to respond.

Sail area / displacement 20.5
TenderStiff

42% of her weight is ballast — moderately stiff, a middle-of-the-road stability.

Ballast 42%

Powered-up and quick to accelerate — this one likes to sail.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
41.7%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
20.5
Displacement / length
205.7
Comfort ratio
18.7
Capsize screening
2.14
Hull speed
6.7 kn
Pounds / inch immersion
923
Hull
Hull type
Fin w/spade rudder
Construction
Fiberglass
Ballast type
Lead
Production
Years built
1984–1985
Units built
8
Designer
Carl Schumacher
Builder
Westerly Marine

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

C&C Yachts 30-29.12 mSame hull familyNear-identical lengthA performance-oriented masthead sloop with a fin keel and spade rudder, designed by C&C for balanced club racing
Jeanneau Rush 319.13 mSame hull familyNear-identical lengthA Ron Holland-designed IOR half-tonner that served as the official boat for the Tour de France à la Voile
Spirit 329.48 mSame hull family0.3 m longerA Jacques De Ridder-designed IOR 23-footer built for nearly two decades as a stiff, masthead-rigged fin-keel sloop
First 30 E (Beneteau - Berret)9.30 mSame hull family0.2 m longerA 1981 International 1/2 Ton Cup winner based on the King One design, built as a masthead sloop for competitive racing
X-Yachts X-959.24 mSame hull familyNear-identical lengthA Niels Jeppesen-designed IOR half-tonner with a high sail-area-to-displacement ratio and an optional taller rig
Granada Yachts 319.39 mSame hull family0.3 m longerA masthead sloop with a spade rudder and nearly 46% ballast ratio, designed for stability in a 31-foot hull

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue