BoatsCaribbea 30

Caribbea 30

Masthead Sloop · Fin With Rudder On Skeg · First built 1988

A Dudley Dix-designed masthead sloop featuring a fin keel and skeg-mounted rudder for balanced offshore performance

Designed by Dudley Dix, built by Nebe Boat Works.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin With Rudder On Skeg

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 20 — a quick, lively motion that feels every wave.

Comfort ratio 20
CoastalBluewater

2.05 — right around the 2.0 line, the edge between coastal and offshore.

Capsize screening 2.05
LightHeavy

191 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 191
EasygoingPowered-up

17.1 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 17.1
TenderStiff

40% of her weight is ballast — moderately stiff, a middle-of-the-road stability.

Ballast 40%

A balanced, easily-driven cruiser — comfortable and forgiving for coastal work.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
40.0%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
17.1
Displacement / length
190.8
Comfort ratio
19.7
Capsize screening
2.05
Hull speed
6.8 kn
Pounds / inch immersion
927
Hull
Hull type
Fin with rudder on skeg
Construction
Wood
Production
Years built
First built 1988
Designer
Dudley Dix
Builder
Nebe Boat Works

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Newport 30-19.14 mSame hull familyNear-identical lengthThe original 1968 production run of this masthead sloop, featuring a fin keel and spade rudder for coastal sailing
Jeanneau Rush 319.13 mSame hull familyNear-identical lengthA Ron Holland-designed IOR half-tonner that served as the official boat for the Tour de France à la Voile
Tartan Marine 30009.13 mSame hull familyNear-identical lengthA Sparkman & Stephens design available with either a fixed keel or a keel-centerboard for flexible shoal-water access
First 30 E (Beneteau - Berret)9.30 mSame hull familyNear-identical lengthA 1981 International 1/2 Ton Cup winner based on the King One design, built as a masthead sloop for competitive racing
C&C Yachts 30-29.12 mSame hull familyNear-identical lengthA performance-oriented masthead sloop with a fin keel and spade rudder, designed by C&C for balanced club racing
X-Yachts X-959.24 mSame hull familyNear-identical lengthA Niels Jeppesen-designed IOR half-tonner with a high sail-area-to-displacement ratio and an optional taller rig

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue