BoatsSoverel Marine 30 (1979)

Soverel Marine 30 (1979)

Fractional Sloop · Fin keel, spade rudder · 1979–1987

A distinct MORC racer with a fin keel and spade rudder, offering a high sail-area-to-displacement ratio for speed

Designed by Mark Soverel.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin w/spade Rudder

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a beamy beam gives 17 — a quick, lively motion that feels every wave.

Comfort ratio 17
CoastalBluewater

2.30 — right around the 2.0 line, the edge between coastal and offshore.

Capsize screening 2.30
LightHeavy

188 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 188
EasygoingPowered-up

23.1 — a lot of sail for her weight; powered-up and eager, a real performer.

Sail area / displacement 23.1
TenderStiff

42% of her weight is ballast — stiff, standing up well to her sails.

Ballast 42%

Powered-up and quick to accelerate — this one likes to sail.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
42.3%
Rig & sail area
Rig
Fractional Sloop
Ratios
SA / displacement
23.1
Displacement / length
188.5
Comfort ratio
16.6
Capsize screening
2.30
Hull speed
6.8 kn
Pounds / inch immersion
1002
Hull
Hull type
Fin w/spade rudder
Construction
Fiberglass
Ballast type
Lead
Production
Years built
1979–1987
Designer
Mark Soverel
Builder
Soverel Marine

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Jeanneau Rush 319.13 mSame hull familyNear-identical lengthA Ron Holland-designed IOR half-tonner that served as the official boat for the Tour de France à la Voile
First 30 E (Beneteau - Berret)9.30 mSame hull family0.2 m longerA 1981 International 1/2 Ton Cup winner based on the King One design, built as a masthead sloop for competitive racing
X-Yachts X-959.24 mSame hull family0.2 m longerA Niels Jeppesen-designed IOR half-tonner with a high sail-area-to-displacement ratio and an optional taller rig
Maestro Boats 319.30 mSame hull family0.2 m longerAn E.G. van de Stadt-designed IOR 1/2 ton racer with a high sail area-to-displacement ratio for spirited performance
C&C Yachts 30-29.12 mSame hull familyNear-identical lengthA performance-oriented masthead sloop with a fin keel and spade rudder, designed by C&C for balanced club racing
Lancer 30-28.99 mSame hull familyNear-identical lengthA masthead sloop derived from the original C&C 30 moulds, offering a stable fin-keel platform for coastal cruising

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue