Sailing Uma · video

What this video covers

The crew of the sailboat Uma installs synthetic teak decking in the cockpit to provide a durable, non-slip surface. After templating the cockpit floor with plastic and Sharpie, they order custom-cut synthetic panels from a supplier in the Netherlands.1:03 To ensure a flat, bubble-free bond, they use a vacuum-bagging technique rather than traditional weights.8:54 They prepare the substrate by scuffing the existing paint and applying a two-part Bostik adhesive.12:25 To prevent glue from squeezing out and complicating the finish, they apply a perimeter bead of Sika 295 UV sealant before vacuuming.13:11 The crew performs the installation at night to avoid high daytime temperatures that could cause the adhesive to cure too quickly.27:27 They use a deburring tool to bevel the edges of the panels for a clean fit.6:37 After 24 hours of curing under vacuum, the panels show consistent adhesion and a weathered teak appearance.21:36

More from Sailing Uma

Solar Sponsor Backed Out Before Sailing Around the World !Sept 2026Our boat won’t look the same after this | Step 495Aug 2026The ONE Thing We Disagreed on This Entire Refit | Step 494Aug 2026We Owe You The Full StoryJul 2026

From Sailing Uma — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.