Sailing Vegvisirvideo
Ep. 2 Transom Repair
2 May 2025 · 9 min · 3K views · Marina Chiapas
What this video covers
Carlota repairs the damaged transom of Vegvisir by sanding away old paint and filling structural imperfections.Watch She uses 80-grit sandpaper to strip the surface, followed by 120-grit, and uses a Dremel tool to open cracks and voids in the fibreglass.0:15 Due to a local shortage of epoxy filler and colloidal silica, she applies automotive plastic body filler to the damaged areas.0:29 She cleans the prepared surface with acetone and a microfibre cloth rather than water to prevent moisture from entering the exposed fibreglass.2:16 She applies four coats of Fibrocentro gelcoat, allowing 24 hours of curing time between each application.3:26 To manage the rough texture left by roller application, she sands between coats with 600-grit paper and removes roller lint using masking tape before painting.5:01 She plans to finish the repair by wet-sanding with 360-grit and 1000-grit paper before performing a final polish of the entire hull.6:58 Proper skin protection is necessary when handling catalysed gelcoat to avoid chemical burns.5:42
More from Sailing Vegvisir
From Sailing Vegvisir — see the channel’s boat, crew, and every analysed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.