Sailing Triteia · video

What this video covers

The owner of an Alberg 30 replaces a failing Raymarine ST2000 tiller pilot with a Pelagic autopilot system while sailing in the southern islands of Thailand.0:24 The installation involves mounting the Pelagic control box inside the navigation station to protect the electronics from water intrusion, a common failure point for the Raymarine unit.7:04 The owner removes an obsolete Raymarine wind instrument from the cockpit bulkhead and installs the Pelagic control head in the existing hole, sealing it with butyl tape.10:25 The actuator connects to the tiller using the existing bronze socket, though the owner must wire the cockpit power plug specifically for a port-side installation to ensure the motor drives the rudder in the correct direction.19:57 The system is plug-and-play with the previous Raymarine power wiring, requiring only the connection of power, ground, and motor leads to the control box.8:39 A test run confirms the Pelagic unit maintains course effectively, though the actuator operates with more noise than the previous Raymarine model.29:12

Boats in this video

More from Sailing Triteia

Victoria Arrives to Victoria, Mahe, Seychelles and We Sail to Silhouette IslandAug 2026Forney Cove on Santa Cruz Island From The Channel Islands Cruising GuideAug 2026Dangerous Sailing in Coral Passes & Storms in the Maldives on a 30ft SailboatAug 2026Pushing Through The Maldives - Cruising in Paradise At the Wrong Time of YearAug 2026

From Sailing Triteia — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.