VOILIER ODINvideo
DECK HATCH AND ALUMINIUM WELDING ( part 1 )
12 November 2022 · 31 min · 8K views
What this video covers
Replacing two 70x70cm deck portholes on a 40-year-old sailboat requires custom adaptation because the new Plastimo units feature rounded corners, while the existing deck openings are square.3:22 To bridge the gap and ensure a watertight seal, the owner fabricates a custom wooden frame to fit the deck’s metal coaming, then constructs an aluminium perimeter frame to sit between the deck and the new portholes.18:20 The aluminium frame is joined using 45-degree mitre cuts and brazed with aluminium welding rods, which include an integrated flux core.24:47 The wooden frame is treated with a saturator to prevent rot from condensation and then sealed with silicone.19:36 The project involves removing old, degraded wood and silicone, treating minor rust spots on the metal coaming, and repainting the area before final installation.11:17 By choosing Plastimo units over higher-priced alternatives, the owner reduces the total cost for two portholes from 5,000 euros to 1,000 euros.1:35 Proper fitment and sealing are critical to preventing leaks in the transition between the square deck opening and the rounded porthole frame.5:00
Boats in this video
More from VOILIER ODIN
From VOILIER ODIN — see the channel’s boat, crew, and every analysed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.