Practical Sailor · video

What this video covers

Bert Vermeer, sailing his 1978 Islander Bahama 30 *Natasha* equipped with a Beta 20 diesel and sail drive, experienced an engine overheat caused by a blocked raw water intake.3:40 After confirming the raw water strainer was empty and the intake hose was clear, he used a dinghy foot pump to force air through the intake line from inside the boat.4:34 By taping the pump hose to the engine’s raw water intake hose and applying pressure, he cleared the obstruction in the sail drive leg.4:39 To prevent future emergencies, he now carries a nylon adapter and hose clamps to facilitate this repair.5:27 He also installed a secondary through-hull intake with a T-valve for redundancy and an Aqua Alarm water flow sensor to provide early warning of cooling system failures.5:55 The Aqua Alarm monitors flow and triggers an audible or visual alert if raw water circulation drops below 1.5 gallons per minute.7:54

Boats in this video

More from Practical Sailor

Can You Do the Great Loop for $20,000Sept 2026Bayfield 36 – A Cheap Bluewater SailboatAug 202610 Sailing Mistakes You’ll Only Make OnceAug 2026Bayfield 32 Boat Tour - The Canadian Cruiser That Crossed the AtlanticAug 2026

From Practical Sailor — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.