Ale & Max - Y2K Sailing Adventure · video

What this video covers

Installing Victron Venus OS on a Raspberry Pi 3 or 4 provides a low-cost, open-source alternative to the dedicated Victron Cerbo GX monitoring system.0:16 The software integrates data from solar charge controllers, inverters, battery monitors like the BMV or SmartShunt, and NMEA 2000 marine electronics into a single dashboard.2:01 Users can access this interface locally via a web browser or remotely through the Victron VRM portal to monitor energy production, adjust charging parameters, and configure system alarms.3:00

To set up the system, download the Venus OS "large" image—which includes Signal K and Node-RED—and flash it onto a 16GB microSD card using the Raspberry Pi Imager software.15:59 After booting the Raspberry Pi, use the VictronConnect app on an Android device via Bluetooth to configure network settings and connect the unit to the boat’s Wi-Fi.21:45 Once connected to the network, the system is accessible via a static IP address on any browser.28:23 The setup allows for real-time firmware updates and remote management of all connected Victron components.12:18

Boats in this video

More from Ale & Max - Y2K Sailing Adventure

Back to the OCEAN: 60 Miles Sailing among Whales & Shark Nets (Australia) | Ep.13-2026Sept 2026WE’RE OFF AGAIN! Course for INDONESIA: Here’s how to come ABOARD with usSept 2026FLYING 7,500 MILES: Leaving Y2K in Australia to Fly Back to ITALY! Ep.12-2026Aug 2026EVERYTHING CHANGES! 1200Ah Lithium & Flying Home to Italy (Sailboat Refit) - Ep. 11-26Jul 2026

From Ale & Max - Y2K Sailing Adventure — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.