A Boat in the Woods · video

What this video covers

Joshua constructs a workshop inside a shed to support the restoration of a 32-foot wooden sailboat in eastern Canada.0:02 He builds custom shelving units using plywood ripped to 10.25 inches, adding front trim to reach a total depth of 11.25 inches.1:10 The structural frame consists of 2x4s resawn into 7/8-inch by 1-7/8-inch strips, sanded and oiled for durability.5:35 To accommodate the uneven walls of the structure, he cuts shelf brackets shorter than the shelf depth and uses shims made from D-grade shingles for levelling.11:15 He installs French cleats across the adjacent wall using a laser level to organise tools and storage bins.20:13 The shelving design utilises 45-degree braces for support, though he identifies a potential failure point in the single-screw attachment method and plans to reinforce the fasteners before loading the shelves to capacity.22:33

More from A Boat in the Woods

Solo Boat Shed Build | 1 Side Roof Down, 1 to Go - No. 50Oct 2026Boat Shed Posts & Beams, Back to Work on the Boat - No. 50Oct 2026I Left the Woods to Learn How to Fix My BoatSept 2026Finishing the Roof & The Boat is Finally Home - No. 47Sept 2026

From A Boat in the Woods — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.