Wildling Sailing · video

What this video covers

The owner of a project boat attempts to mount a used Yamaha 9.9 high-thrust outboard engine to a custom-built wooden engine bracket.1:40 After installing the motor, the engine box alignment proves unstable, prompting a decision to scrap the current mounting design in favor of a more rigid, stainless steel cage structure that will also serve as a cockpit frame.12:44 While inspecting the vessel's rear beams, the owner discovers rot in the toe rail and lashing points, necessitating further structural repairs.16:59 The project faces delays due to incorrect stainless steel profile orders, poor weather conditions, and the complexity of replacing old beam lashings with 8mm pre-stretched polyester line.17:30 Despite initial goals to have the vessel under a full rig by the end of the year, the owner postpones the sailing deadline to the following spring to ensure the structural integrity of the mast support and steering systems.22:09

More from Wildling Sailing

One Step Back, One Step Sideways & One Step Forward | My Budget Catamaran RefitOct 2026I Lifted Her Out For a Very Important Rebuild.Sept 2026One Final Refit Before Crossing The Atlantic.Aug 20262 Days Alone at Sea On my Primitive Double-Canoe.Aug 2026

From Wildling Sailing — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.