Sailing Magic Carpet · video

What this video covers

The refit of a Cape George Cutter 36 continues with the reconstruction of the cockpit and the finishing of the interior chart table. The crew installs a two-layer plywood cockpit deck, with the first layer bonded to structural beams and the second layer staggered for strength before glassing.4:16 To prepare for future systems, the hull is drilled for a propane locker vent, cockpit drains, and exhaust ports.8:19

Simultaneously, the interior chart table undergoes a multi-layer epoxy application.5:45 After a previous attempt resulted in surface contamination—likely silicone—the surface is degreased with acetone before applying a self-leveling tabletop epoxy.11:22 A heat gun is used during the pour to remove air bubbles and ensure a smooth finish.16:31 The crew notes that the project’s pace was significantly hampered by visa-related time constraints, which added pressure to the structural and finishing tasks.30:59 The work concludes with the application of varnish to teak trim, confirming that temperature control is critical for preventing runs on vertical surfaces.29:53

Boats in this video

More from Sailing Magic Carpet

We're Starting to Lose Our MindsOct 2026We Found An Old Map Leading Us To Hotsprings...Oct 2026A Mysterious Presence on this Northern IslandSept 2026Sailing Northern Canada | Alone and at PeaceSept 2026

From Sailing Magic Carpet — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.