Sailing Good, Bad, and Ugly · video

What this video covers

Matt and Kristen install drywall in their kitchen renovation, focusing on framing a coffee bar niche and two 30-inch wide archways. Matt uses a drill with a universal dimpler to set screws, employing a technique to avoid "clickers"—protruding screw heads that interfere with tape and mud.2:09 To manage the height of the archways and ensure natural light flow, the pair hangs drywall before finalizing the arch shapes, using a Dremel with a roto-zip bit to trim the panels in place.21:26 Matt intentionally leaves some screws out during the initial hanging phase to allow for easier removal if framing adjustments are required.10:32 The project reveals the difficulty of cutting and fitting large sheets while working on ladders, leading to gaps that require extra mudding.29:04 The couple plans to lower the coffee bar niche to align with the dining room walkway's spring line for visual consistency.27:42 Proper tool selection, such as a dedicated drywall T-square, and making cuts on the floor rather than on a ladder improve efficiency and accuracy.28:24

More from Sailing Good, Bad, and Ugly

We Needed a Win and This Wasn’t ItAug 2026The End Is Finally NearAug 2026We've Been Avoiding This and We Can't AnymoreAug 2026We Were Not Ready For This Outcome!Aug 2026

From Sailing Good, Bad, and Ugly — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.