Breaking Waves · video

What this video covers

Ben and Alie install a Hydrovane self-steering system on their boat in Barra de Navidad, Mexico, to provide redundant steering for an upcoming Pacific Ocean crossing.0:26 The installation requires mounting the shaft vertically on the transom, which they achieve using teak mounting pads to compensate for the hull shape.1:54 To ensure clearance from the existing davit arm, they adjust the shaft height to sit approximately one inch above the waterline.2:06 The process involves drilling through the transom, sealing the mounting pads with Sika-flex, and installing interior backing plates for structural stability.7:21 Final assembly steps include aligning the tiller arm, inserting alignment pins, and tensioning the wind vane sail onto its frame.9:43 The Hydrovane serves as both an auxiliary rudder and a power-free steering solution, mitigating the risk of total autopilot failure during long-distance passages.1:12 Proper alignment of the shaft and careful management of sealant during the through-hull mounting process are critical to a successful installation.8:16

More from Breaking Waves

THE FINAL Passage! | Sailing New Caledonia to New ZealandJul 2025Boatlife - From Sea To Fire| INSANE ACTIVE VOLCANO Trek and Our Final Sail from VanuatuApr 2025OFFGRID In the Jungle: A Primitive Community ExperienceMar 2025THE TRUTH UNCOVERED | What Sailing Is ACTUALLY Like In The Remote Corners Of the Pacific OceanMar 2025

From Breaking Waves — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.