EXPLORIST life Mobile Marine & Off-Grid Electrical · video

What this video covers

Nate from EXPLORIST life performs electrical system diagnostics on three camper vans at VanFest in Hurricane, Utah.Watch For a 24-volt system with 800 amp-hours of battery, he corrects incorrect Victron SmartShunt settings that caused premature 100% state-of-charge readings; he adjusts the charged voltage to 28.2 volts and changes the battery state-of-charge reset to clear to ensure accurate synchronization.0:56 On a second van, he investigates reports of melting plastic and identifies undersized 10-gauge wiring and loose lugs on a 4,000-watt inverter.5:52 He recommends replacing existing wiring with 2-0 and 4-0 gauge cable and installing fuses between the battery bank, bus bars, and positive terminals to prevent fire hazards.11:18 Finally, he troubleshoots a 120-volt AC distribution panel in a 30-year-old van where the air conditioner functions but outlets remain dead.14:45 He isolates the issue to a potentially faulty tandem breaker or loose wiring behind the distribution panel.16:36 Proper wire sizing and fusing are essential for high-wattage inverter safety.

More from EXPLORIST life Mobile Marine & Off-Grid Electrical

Battery Monitor Troubleshooting Tips - Battery Monitoring Playlist | Ep: 3/3Dec 2025Bluetooth vs Wired Battery Monitoring | Battery Monitoring Playlist | Ep: 2/3Dec 2025How to Wire a REDARC BCDC Alpha 100 R (Step-by-Step Install Guide)Dec 2025Upgrading a Living Quarters Horse Trailer With Lithium Power! (400W Solar + SOK Battery Install)Nov 2025

From EXPLORIST life Mobile Marine & Off-Grid Electrical — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.