Epiphany Sailingvídeo
Replaced Morse Cable for Throttle. Was not getting full RPM on Sailboat engine.
22 de diciembre de 2023 · 8 min · 76 visitas
Qué cubre este vídeo
The engine failed to reach full RPM, topping out at 1,500 to 1,800 RPM instead of the required 2,500 RPM unloaded.0:08 After verifying the fuel system was clear, the inspection revealed a rusted and broken throttle cable sheath at the helm.0:33 Replacing the cable required accessing the engine compartment through a tight quarter berth, removing the steering wheel, and navigating around the autopilot drive motor and steering quadrant.3:46 The old cable showed multiple points of failure, including severe corrosion at the jacket and the clevis pin.5:24 After cleaning the rusted clevis with a wire brush and drill bit, the new cable was installed and adjusted to ensure the throttle lever reached its full stop on the fuel pump.6:03 The repair restored the engine's full range of motion, though the tachometer remained intermittent.8:05 Replacing a throttle cable often requires removing steering components and working in confined spaces to reach mounting hardware.
Barcos en este vídeo
Más de Epiphany Sailing
De Epiphany Sailing — mira el barco del canal, la tripulación y cada vídeo analizado.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.