Epiphany Sailingvideo
Replaced Morse Cable for Throttle. Was not getting full RPM on Sailboat engine.
22 dicembre 2023 · 8 min · 76 visualizzazioni
Cosa tratta questo video
The engine failed to reach full RPM, topping out at 1,500 to 1,800 RPM instead of the required 2,500 RPM unloaded.0:08 After verifying the fuel system was clear, the inspection revealed a rusted and broken throttle cable sheath at the helm.0:33 Replacing the cable required accessing the engine compartment through a tight quarter berth, removing the steering wheel, and navigating around the autopilot drive motor and steering quadrant.3:46 The old cable showed multiple points of failure, including severe corrosion at the jacket and the clevis pin.5:24 After cleaning the rusted clevis with a wire brush and drill bit, the new cable was installed and adjusted to ensure the throttle lever reached its full stop on the fuel pump.6:03 The repair restored the engine's full range of motion, though the tachometer remained intermittent.8:05 Replacing a throttle cable often requires removing steering components and working in confined spaces to reach mounting hardware.
Barche in questo video
Altro da Epiphany Sailing
Da Epiphany Sailing — guarda la barca, l'equipaggio e ogni video analizzato del canale.
The Sailing Directory Newsletter
Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.