The Sailing Brothers · vidéo

Ce que couvre cette vidéo

The crew of a Prout Ltd. Snowgoose 37 Elite applies a DIY copper-based anti-fouling system to their catamaran’s hulls while in a boatyard.1:18 To create the coating, they mix solvent-free epoxy resin with 320-mesh pure copper powder at a ratio of 1.9 kilograms of powder per liter of resin.14:39 Before application, the team spends six days sanding the hull to remove old finish and then rolls on a clear epoxy barrier coat to seal the surface.0:43 They apply the copper-loaded epoxy in multiple layers, timing each subsequent coat to ensure it is applied "wet-on-tacky" to maintain a chemical bond between layers.15:51 Because the mixture is heavy, they continuously stir the paint to keep the copper particles suspended.14:52 After the final coat cures, the plan requires sanding the surface with 600-grit paper to expose the copper particles to the water.2:36 The project aims to create a long-lasting, hard anti-fouling surface as a cost-effective alternative to commercial products.1:19

Bateaux dans cette vidéo

Plus de vidéos de The Sailing Brothers

Sailing from PARADISE to the Loudest City in Indonesiaaoût 2026SAILING AND ANCHORING IN SUPER DEEP WATER. HIKING AN ACTIVE VOLCANO août 2026Channel Update From Indonesiaaoût 2026Theft, Damage And Corruption. Worst Week Of Our Cruising Adventure!août 2026

De The Sailing Brothers — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.