Classic Yacht TV · vidéo

Ce que couvre cette vidéo

Cutting a hinge butt into timber requires precise marking and controlled chisel work to ensure a flush fit. Begin by using a marking gauge to measure the distance from the outside edge of the hinge flap to the center of the knuckle.0:17 Transfer this measurement to the wood to establish the correct overhang for the door.0:31 Use a mallet and chisel to cut the perimeter of the recess, then remove the bulk of the waste timber with repeated, shallow diagonal cuts.0:10 Align the chisel carefully with the scribed indentation line created by the marking gauge to define the back edge of the recess.1:39 Maintain gentle pressure throughout the process to prevent splitting the wood or cutting deeper than the intended depth.1:17 Visual alignment remains critical for the end cuts to achieve a tight, gap-free fit.1:53 Careful, incremental material removal prevents damage to the surrounding timber and ensures a professional finish for the hinge installation.

Plus de vidéos de Classic Yacht TV

EP13 Fastnet update | Interior layout: Building the schooner MALABAR IVmai 2026EP12 fitting planks: Building the schooner Malabar IVfévr. 2026EP11 shaping planks: : Building the schooner Malabar IVjanv. 2026EP10 Steaming and fitting Green Oak frames: Building the schooner Malabar IVjanv. 2026

De Classic Yacht TV — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.