Sailing Millennial Falconvidéo

Let's FINALLY put this problem to bed! [EP 110] - Serpentine belt installation and A Dinghy Debacle

12 octobre 2020 · 17 min · 64K vues

Ce que couvre cette vidéo

An outboard motor misfiring under load and a persistent issue with shredding alternator belts on the Millennial Falcon require two separate mechanical interventions. The outboard engine’s performance issues, characterized by spluttering and loss of power when in gear, stem from a loose spark plug that failed to maintain compression.7:10 Tightening the plug restores the engine's idle and performance.7:55 Separately, the vessel’s alternator belt system suffers from chronic dust accumulation and premature wear, necessitating a conversion to a serpentine belt kit.10:16 The installation involves replacing the crankshaft, water pump, and alternator pulleys with new sleeves designed to accommodate the serpentine belt while maintaining compatibility with the existing watermaker drive.11:42 After removing the alternator to swap its pulley, the crew completes the conversion and confirms the system reaches a bulk charge of 14.2 volts during a two-hour test.16:40 Proper belt tension and pulley alignment are critical to preventing the dust buildup that previously caused the alternator to throttle back and fail.

Regarder sur YouTube

Bateaux dans cette vidéo

Tayana VANCOUVER 42Leur bateau

Plus de vidéos de Sailing Millennial Falcon

Time to Say Goodbye (Not Clickbait) [EP 222]mars 2024Staying WARM on a Sailboat - Dickinsons Diesel Heater Install [EP 221]mars 2024Boat Saloon Overhaul BEFORE vs AFTER [EP 220]mars 2024The GREATEST thing we've seen in 20,000 Miles [EP 205]août 2023

De Sailing Millennial Falcon — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.

Signaler un problème