Gone with the Wynns · video

Hva denne videoen dekker

Jessica Gatt, Managing Director of Marine Protection Systems (MPS), conducts a full corrosion and stray-current inspection aboard Nikki and Jason Wynn's aluminium boat — purchased at auction with no survey and no sea trial — while it sits in fresh water.▶ 1:30 Gatt's inspection covers hull grounding versus isolated battery systems, the risks of circulating current on metallic hulls (aluminium, steel, carbon), and how to test for each using a custom MPS tool and a clamp meter. She explains galvanic corrosion versus stray current: galvanic corrosion attacks the least noble metal predictably, while stray current destroys any metal in its path within hours — propellers, shafts, and rudders included.▶ 12:02 Higher-voltage 48V systems require as little as 0.1–0.2 amps to cause the same damage a 12V system would need 300–400 milliamps to produce.▶ 12:54 Shore power at earthed marinas daisy-chains pedestals, turning the marina into a galvanic cell; an isolation transformer breaks that connection and is confirmed effective on the Wynns' boat via open-circuit resistance testing.▶ 17:20 Anode selection depends on hull material and cruising environment: magnesium anodes suit fresh water only, zinc anodes self-passivate in fresh water and carry heavier metals, and aluminium anodes — alloyed with magnesium and other metals to increase activity — work across environments and are the correct choice for an aluminium hull transitioning from fresh to salt water.▶ 23:07 The ABYC minimum for cathodic protection is 200 millivolts; overprotection causes its own rapid disbondment and coating failure.▶ 23:44

Mer fra Gone with the Wynns

We Thought We Were Ready For Antarcticamai 2026We Sailed Into an Active Volcano…in Antarctica!apr. 2026Re-Naming Our Boat (stuck in maritime purgatory)feb. 2026Our First Christmas Market (& A Thank You)des. 2025

Fra Gone with the Wynns – se kanalens båt, mannskap og alle analyserte videoer.