Sail Life · video

What this video covers

Repairing gelcoat crazing on an Antares 44 catamaran requires stabilizing the surface with a layer of fiberglass before fairing and painting.2:42 A comparative test on a nearby vessel shows that painting over crazed gelcoat without fiberglass reinforcement leads to rapid crack recurrence, particularly on dark-colored surfaces exposed to high solar heat.8:53 To address this on the project boat, the hull is sanded, primed with high-build primer, and reinforced with a layer of twill fabric set in epoxy.13:12

For non-skid surfaces, SoftSand rubberized particles are applied by sprinkling them into a wet coat of topcoat.7:04 This method provides a uniform texture that is easier to apply than traditional alternatives like KiwiGrip.11:34 Additionally, the project requires removing the boat's diesel tanks to access and replace a damaged water tank located behind a structural bulkhead.1:36 The bulkhead is removed by cutting, with plans to re-tab it using a two-step process that forms a flange before final bonding.16:54

Boats in this video

More from Sail Life

Can I build an aluminum fuel tank with the xTool MetalFab laser welder and CNC? Ep. 693Aug 2026The road back to boat work: shipping delays, site prep and bending metal with a 3D print Ep. 692Aug 2026The road back to boat work: Cutting trees, picking up plywood, and 240V in the shop. Ep. 691Aug 2026Our Mammotion LUBA 3 AWD is going to save us so a lot of time!Aug 2026

From Sail Life — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.