Staying WARM on a Sailboat - Dickinsons Diesel Heater Install [EP 221]
March 11, 2024 · 18 min · 50K views · Scotland
Crew laughs on snowy deck, boat docked in harbor
What this video covers
Adam and Khiara install a Dickinson diesel heater aboard their Tayana Vancouver 42 during a Scottish winter, rebuilding the saloon specifically to accommodate it.0:09 The fuel system uses a hybrid gravity-feed and transfer-pump arrangement: a T-junction splices into the main engine fuel line, a lift pump fills a 5-litre day tank, and fuel then gravity-feeds down to the heater through a flared brass fitting — eliminating the constant ticking of a direct-feed pump and preventing fuel starvation to the engine.1:29 Shutoff valves on both sides of the T-junction isolate the heater circuit from the engine.3:29 For the flue, they remove a Dorade vent box, cut down the fiberglass deck fitting, build a tapered wooden base to level the chimney on the sloped deck, and seal it with high-heat silicone — a job interrupted three times by snow.5:17 Wall protection behind the heater uses ceramic insulating bricks plus a stainless steel plate on standoff screws.9:13 Flaring the copper fuel line inside a tight cupboard requires two attempts.14:47 An airlock in the fuel line delays first light; disconnecting and reconnecting the line clears it.16:44 The heater takes roughly 15 minutes to reach operating temperature after priming.17:42 A day tank sized for roughly 12-hour intervals can be swapped for a larger one if refill frequency proves inconvenient.13:01
Boats in this video
More from Sailing Millennial Falcon
From Sailing Millennial Falcon — see the channel’s boat, crew, and every analyzed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.