BoatsAnnie 30

Annie 30

Masthead Sloop · Long Keel w/trans. Hung Rudder · First built 1980

A Chuck Paine-designed masthead sloop with a long keel and heavy displacement, built for stability and comfort since 1980

Designed by C. W. (Chuck) Paine, built by Morris Yachts.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Long Keel w/trans. Hung Rudder

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her heavy displacement on a moderate beam gives 33 — a sea-kindly motion in a seaway.

Comfort ratio 33
CoastalBluewater

1.70 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.70
LightHeavy

335 — heavy for her waterline, built to carry stores and ride steadily.

Displacement / length 335
EasygoingPowered-up

14.6 — modest power for her weight; easygoing rather than lively, and happier with a breeze.

Sail area / displacement 14.6
TenderStiff

40% of her weight is ballast — moderately stiff, a middle-of-the-road stability.

Ballast 40%

Built heavy and sea-kindly — a boat made to cross oceans and forgive a rough night.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
39.9%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
14.6
Displacement / length
334.7
Comfort ratio
33.1
Capsize screening
1.70
Hull speed
6.6 kn
Pounds / inch immersion
825
Hull
Hull type
Long keel w/trans. hung rudder
Construction
Fiberglass
Ballast type
Lead
Production
Years built
First built 1980
Units built
16
Designer
C. W. (Chuck) Paine
Builder
Morris Yachts

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Bayfield 30/329.75 mSame hull family0.8 m longerA rare 32C variant featuring a tall rig, built in a limited run of five hulls for increased sail area
Vancouver 278.23 mSame hull family0.7 m shorterA Robert B. Harris-designed cutter with a long keel, built across two continents to provide a stiff, comfortable passage
Cape Dory 30C9.21 mSame hull family0.2 m longerA cutter-rigged cruiser with a full keel and a 1.27-metre draft, built for steady performance between 1976 and 1987
Vindo 328.95 mSame hull familyNear-identical lengthA classic Carl Andersson-designed masthead sloop featuring a long keel and traditional build for stable, comfortable cruising
Allied Boat Co. Seawind9.30 mSame hull family0.3 m longerA Thomas Gillmer-designed masthead ketch with a long keel, marking both the beginning and the end of the Allied Boat Co.
Cape Dory 288.56 mSame hull family0.4 m shorterA classic Carl Alberg full-keel masthead sloop designed for steady, comfortable cruising

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue