BoatsFraser 30 MS

Fraser 30 MS

Staysail Ketch · Long Keel · First built 1970

A staysail ketch motorsailer featuring a protected pilot house and a long keel, often finished by home builders

Designed by Len De Kleer, built by Dekleer Brothers Ltd.

LOA
Beam
Draft (max)
Displacement
Hull type
Long Keel

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 29 — a moderate, middle-of-the-road motion.

Comfort ratio 29
CoastalBluewater

1.80 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.80
LightHeavy

259 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 259

A capable cruiser that sits just inside the offshore line — coastal work with real passages in her.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Rig & sail area
Rig
Staysail Ketch
Ratios
Displacement / length
258.9
Comfort ratio
28.6
Capsize screening
1.80
Hull speed
6.9 kn
Pounds / inch immersion
953
Hull
Hull type
Long Keel
Construction
Fiberglass
Production
Years built
First built 1970
Units built
36
Designer
Len De Kleer
Builder
Dekleer Brothers Ltd, Windboats Marine Ltd

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Bayfield 30/329.75 mSame hull family0.6 m longerA rare 32C variant featuring a tall rig, built in a limited run of five hulls for increased sail area
Cape Dory 30C9.21 mSame hull familyNear-identical lengthA cutter-rigged cruiser with a full keel and a 1.27-metre draft, built for steady performance between 1976 and 1987
Cape Dory 319.55 mSame hull family0.4 m longerA Carl Alberg-designed cutter with a long keel, built between 1983 and 1985 for traditional, steady offshore cruising
Allied Boat Co. Seawind9.30 mSame hull family0.2 m longerA Thomas Gillmer-designed masthead ketch with a long keel, marking both the beginning and the end of the Allied Boat Co.
Pacific Seacraft Orion 279.42 mSame hull family0.3 m longerA heavy-displacement cutter by Henry Mohrschladt, built for offshore stability with a long keel and conservative rig
Sea Sprite 309.20 mSame hull familyNear-identical lengthA 9.2-metre cruiser with a 41% ballast ratio, delivering a stiff and steady motion for coastal passages

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue