BoatsNauticat 385

Nauticat 385

Masthead Sloop · Fin w/rudder On Partial Skeg · First built 2005

A 2005 masthead sloop with a fin keel and partial skeg rudder, serving as the successor to the Nauticat 39

Designed by Kaj Gustafsson.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin w/rudder On Partial Skeg

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 35 — a sea-kindly motion in a seaway.

Comfort ratio 35
CoastalBluewater

1.72 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.72
LightHeavy

257 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 257
EasygoingPowered-up

17.1 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 17.1
TenderStiff

32% of her weight is ballast — on the tender side; she'll heel readily and want a reef sooner.

Ballast 32%

Built heavy and sea-kindly — a boat made to cross oceans and forgive a rough night.

  • Heavier than ~82% of boats her size on file

Compared with 2898 boats of the same type within a quarter of her length.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
32.1%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
17.1
Displacement / length
256.9
Comfort ratio
34.9
Capsize screening
1.72
Hull speed
7.7 kn
Pounds / inch immersion
1398
Hull
Hull type
Fin w/rudder on partial skeg
Construction
Fiberglass
Ballast type
Lead
Production
Years built
First built 2005
Designer
Kaj Gustafsson
Builder
Nauticat Yachts OY

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Aragosa Yachts 3811.61 mSame hull familyNear-identical lengthA 1988 masthead sloop with a 35% ballast ratio, designed by Ted Brewer for balanced offshore performance
Hallberg-Rassy 3811.57 mSame hull familyNear-identical lengthA 1970s masthead cruiser featuring a skeg-hung rudder and a substantial 43% ballast ratio for heavy-weather stability
RM Yachts 118011.80 mSame hull family0.2 m longerA Marc Lombard-designed performance cruiser featuring a wide beam, dual rudders, and a powerful cutter rig
Warrior 3811.58 mSame hull familyNear-identical lengthA short-run 1980s cruiser featuring a shallow 1.52m draft and a heavy ballast-to-displacement ratio for steady offshore work
Morgan Yachts 38211.68 mSame hull familyNear-identical lengthA Ted Brewer-designed masthead sloop built for offshore stability, featuring a skeg-hung rudder and a stiff displacement
Sabre Yachts 38 MKII11.79 mSame hull familyNear-identical lengthA 1988-1995 production cruiser with a 1.98m draft and a skeg-mounted rudder for offshore stability

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue