BoatsAlbin Marine Stratus 36

Albin Marine Stratus 36

Fractional Sloop · Fin keel, spade rudder · 1980–1984

A Peter Norlin-designed 3/4 ton Cup winner, this fractional sloop balances competitive pedigree with teak-decked comfort

Designed by Peter Norlin.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin w/spade Rudder

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 25 — a moderate, middle-of-the-road motion.

Comfort ratio 25
CoastalBluewater

1.92 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.92
LightHeavy

253 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 253
EasygoingPowered-up

17.8 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 17.8
TenderStiff

43% of her weight is ballast — stiff, standing up well to her sails.

Ballast 43%

A capable cruiser that sits just inside the offshore line — coastal work with real passages in her.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
43.3%
Rig & sail area
Rig
Fractional Sloop
Ratios
SA / displacement
17.8
Displacement / length
253.3
Comfort ratio
25.1
Capsize screening
1.92
Hull speed
7.0 kn
Pounds / inch immersion
1054
Hull
Hull type
Fin w/spade rudder
Construction
Fiberglass
Ballast type
Lead
Production
Years built
1980–1984
Units built
130
Designer
Peter Norlin
Builder
Albin Marine

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Hughes 3510.82 mSame hull familyNear-identical lengthA Sparkman & Stephens masthead sloop derived from design #2166, featuring a fin keel and skeg-mounted rudder
Contessa 3510.82 mSame hull familyNear-identical lengthA Doug Peterson-designed IOR One Ton racer that claimed the 1974 International One Ton Cup with her prototype Gumboots
Freedom Yachts 35 (Pedrick)10.79 mSame hull familyNear-identical lengthA 1993 performance cruiser with a deep 1.98-metre draft and a spade rudder for responsive handling
S2 Yachts 35C10.72 mSame hull familyNear-identical lengthA short-lived 1986-1987 masthead sloop with a shallow 1.3-metre draft and a balanced 43% ballast ratio
Najad Yachts 36010.75 mSame hull familyNear-identical lengthA 10.75-metre cruiser with a 43% ballast ratio, engineered for high-latitude stability and offshore comfort
Dufour Yachts 3710.77 mSame hull familyNear-identical lengthA modern fractional sloop from Felci Yacht Design, balancing a performance-oriented hull with a stable, comfortable beam

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue