BoatworksToday · video

What this video covers

Andy fills old screw and mounting holes on a boat deck to prepare the surface for a new teak installation.1:38 He uses TotalBoat TotalFair, a pre-thickened, two-part epoxy fairing compound available through Jamestown Distributors.1:50 The product requires a one-to-one mixing ratio by volume, and the base and catalyst feature contrasting colours to ensure a consistent blend.4:43 Because the compound is thick, it resists sagging on vertical surfaces.4:22 To ensure complete coverage of the holes, he applies the filler from two directions.5:28 Before application, he cleans the deck and holes with a vacuum brush attachment to remove dust and sanding residue.6:14 He leaves the filled holes unsanded to avoid redundant labour, as he plans to apply a layer of fibreglass to the cabin top before finishing the non-skid surfaces.6:26

More from BoatworksToday

I Was Wrong About My Boat's Victron Wiring (You Were Right!)Sept 2026Will This Entire Victron Electrical System Fit In My Little Boat?Aug 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!Aug 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!Aug 2026

From BoatworksToday — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.