BoatworksTodayvideo
The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!
23 August 2026 · 33 min · 10K views
What this video covers
Achieving proper film thickness is the primary goal when applying two-part marine primer, rather than attempting to roll a perfectly smooth finish. Over-reducing primer to improve flow and smoothness causes the coating to become too thin, which leads to burn-through during the necessary sanding process. When sanding thin coats, the applicator risks exposing the underlying fairing compound or gel coat, creating visible spots that require additional layers of paint to cover. For standard two-part primers, mix the reducer at 12 to 15 per cent. Apply the material with as few roller strokes as possible to prevent premature solvent evaporation, which inhibits levelling. If working in high temperatures, direct sunlight, or windy conditions, increase the reducer slightly—up to 20 per cent—but compensate by applying an extra coat rather than overworking the surface. While one-part primers cure through solvent evaporation, two-part materials rely on a chemical reaction, allowing for a heavier, more durable application. Sanding is an unavoidable step in the finishing process, and maintaining adequate film thickness ensures the surface can be levelled without compromising the primer layer.
More from BoatworksToday
From BoatworksToday — see the channel’s boat, crew, and every analysed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.