BoatworksToday · video

What this video covers

Tabbing bulkheads into a 1970 Westwind Paceship 24 requires creating a structural fillet and applying multiple layers of 1708 fiberglass cloth.5:29 To ensure a consistent radius for the fiberglass, pack a thickened epoxy paste—mixed with silica for sag resistance—around the bulkhead perimeter before laying the glass.5:20 Using a 2-to-1 epoxy resin provides a longer working time and lower viscosity for easier saturation of the 1708 material compared to a 5-to-1 mix.7:19 When working in confined spaces, cut fiberglass strips into manageable 2-to-3-foot lengths to maintain control during application.6:41 If fiberglass sags or fails to set correctly, allow the resin to cure fully, grind away the defective section, and re-apply the glass.12:53 Three layers of 1708 tabbing on both the fore and aft faces of the bulkheads provide significantly more structural integrity than the original factory installation.16:46 Fatigue often leads to application errors, so walking away when frustration mounts prevents compounding mistakes.11:15

More from BoatworksToday

Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraJul 2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!Jul 2026Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!Jun 2026Everything Fits! ~ Coosa Bulkheads, New Soles & Closing Out The Old Thruhulls!Jun 2026

From BoatworksToday — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.