Sven Yrvind · video

What this video covers

Sven Yrvind installs a custom electrical switch panel for his small cruiser, incorporating five on-off switches for cabin lighting and three additional reading lights.▶ 1:07 He drills a 23-millimetre hole into the bulkhead to mount the panel, using a 30-millimetre diameter spacer to reinforce the thin material and ensure a flush fit.▶ 1:39 Because the switches are designed for larger vessels with more clearance, Yrvind fabricates a custom adapter to accommodate the components.▶ 2:56 He countersinks the conical holes to resolve fitment issues and rotates the switches 180 degrees to prevent screw interference.▶ 3:42 The installation requires wiring individual red and black leads to each terminal, a process he contrasts with his earlier reliance on kerosene lamps.▶ 4:46 The project emphasises simplicity in boat systems, prioritising manual fabrication and mechanical adaptation over pre-made solutions.

More from Sven Yrvind

Kai the bow paddle.Jul 2026About safety.Jul 2026My solution to crossing the Doldrums without using an engine.Jul 2026Goose Barnacles Remower.Jul 2026

From Sven Yrvind — see the channel’s boat, crew, and every analysed video.