BoatHowTo · video

What this video covers

Fuses and circuit breakers protect conductors, not the devices at the end of a circuit — a point Nigel Calder calls a common and complete misunderstanding among sailors.▶ 0:35 A short circuit can drive hundreds of amps through a conductor, melting it along its entire run back to the battery; if that conductor runs in a bundle, it melts adjacent conductors and triggers multiple simultaneous short circuits.▶ 1:13 The fuse or breaker must sit at the source-of-power end of the circuit, not in front of the load, so it can interrupt the high-current flow before the conductor fails.▶ 1:46 Placing a fuse directly ahead of a device protects nothing upstream.▶ 2:27 Jan Attenstedt and Calder note the rule applies equally to DC and AC circuits, and that the fuse must be within a few centimetres or inches of the power source when exact placement is impractical.▶ 2:14 The discussion references the BoatHowTo Boat Electrics 101 course and a free primer article by Calder for detailed guidance on overcurrent protection device placement.▶ 2:58

More from BoatHowTo

SODIUM ION Batteries - the Future of Boating or Marketing Hype?| Ask The Expert with NIGEL CALDERJul 2026Are Household POWERSTATIONS a viable Solution ON BOATS?? | Ask The Expert with NIGEL CALDERJul 2026ONE SWITCH for TWO PUMPS?? (Pontoon Boat Setup) | Ask The Expert with NIGEL CALDERJul 2026OIL LEAKS at the Crankshaft... | Ask The Expert with NIGEL CALDERJul 2026

From BoatHowTo — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.